| |
|
|
AK47 / SKS / Galil Gunsmithing
|
Printable PDF AK Gunsmithing
Worksheet |
|
Assembly
Service |
Assemble complete rifle using customer
supplied bare receiver, demilled parts kit, and
necessary US parts.Includes 1) Rivet front trunnion 2)
rear trunnion, 3) Rivet trigger guard in new stamped
receiver 4)Install Barrel, Headspace 5)Install US parts,
6) Test Fire for function. Service includes sand
blasting all carbon metal parts and refinish in mil-spec
Maganese phosphate (Brownell’s Alumna-Hyde II may be
used on non-carbon steel parts |
|
|
Assembly
Service on New US made barrel
|
Assemble complete rifle using customer
supplied bare receiver, all new parts kit ( a previously
unassembled AK kit which has no barrel components
installed), and necessary US parts. 1) Rivet front
trunnion 2) rear trunnion, 3) Rivet trigger guard in new
stamped receiver 4)Install Barrel, Headspace 5)Install
US parts, 6) Test Fire for function.. Service includes
sand blasting all carbon metal parts and refinish in
mil-spec Maganese phosphate (Brownell’s Alumna-Hyde II
may be used on non-carbon steel parts |
$350.00 |
|
Assembly on Galil and Milled AK47 Receiver
|
Assemble complete rifle using
customer supplied bare receiver, demilled parts kit, and
necessary US parts.Includes 1) Install Barrell and true
front sight assembly 2) Rivet trigger guard in new
receiver 3) Check Headspace 4)Install US parts, 5) Test
Fire for function. Service includes sand blasting all
carbon metal parts and refinish in mil-spec Maganese
phosphate (Brownell’s Alumna-Hyde II may be used on
non-carbon steel parts |
$350.00 |
|
Assembly: AKS-74U & AKS-74S (Krinkov) under- folders
|
Assemble complete rifle using customer supplied bare
receiver, demilled parts kit, and necessary US
parts.Includes 1) Rivet front trunnion 2) rear trunnion,
3) Rivet trigger guard in new stamped receiver 4)Install
Barrel, Headspace 5) Mill receiver for Krinkov style
underfolding stock 6)Install US parts, 7) Test Fire for
function. Service includes sand blasting all carbon
metal parts and refinish in mil-spec Maganese phosphate
(Brownell’s Alumna-Hyde II may be used on non-carbon
steel parts |
$350.00 |
|
Gunsmithing: SKS |
Install new furniture kit: dissemble rifle and components,
degrease, clean, and lubricate all parts. Assemble on
new U.S. made customer supplied/purchased furniture kit.
Test fire for function |
$150.00 |
|
ADDITONAL SERVICES
|
|
Parkerize ENTIRE WEAPON
|
sand blasting & complete disassembly included |
$150.00 |
|
Parkerize Parts |
Receiver |
$35.00 |
|
Parkerize Parts |
Barrel |
$75.00 |
|
Parkerize Parts |
Misc Small Parts |
$55.00 |
|
Permanently affix Muzzle Brake
|
silver solder, blind pin, locktite, etc) |
$50.00 |
|
Mill Receiver
|
Mill Stamped Receiver for Krinkov and AK74 Style Side Folding
Stocks |
$150.00 |
|
Range Test |
Range test & sight in (ammo not included) |
50-150 |
|
|
|
|
|
|
|
|
|
