|
Printable PDF AR/M16 Gunsmithing
Worksheet |
|
SERVICES
|
DESCRIPTION |
PRICE |
| Assembly Service |
Barrel & Complete Upper Assembly - |
$95.00 |
| Assembly Service |
Complete Lower Assembly |
$40.00 |
| Assembly Service |
Build Complete Assembly |
$125.00 |
| Complete Armory Clean & Inspect |
1. Complete full disassembly
2. Clean each part and lubricate
3. Inspect each part for cracks and wear
4. Bore and chamber scrubbed clean
5. Reassembled and torqued to proper specification.
6. Function test
7. Fully armory gauged |
$82.50 |
| Install Floating Merchant Handguard |
DCM legal - Will not fit
on rifles with permanent recoil reducer. Part not included) |
$55.00 |
| Install Floating Handguard Tube |
DCM legal - Will not fit on rifles with permanent recoil
reducer. Part not included |
$55.00 |
| Drill and tap gas block for rotary adjustment of front sight |
|
$38.00 |
| Drill and tap barrel for front sight base |
|
$45.00 |
| Recrown Barrel True to Bore |
1. On existing barrel (barrel
must be removed
2. On new barrel (barrel off receiver |
$79.00
$38.00 |
| Turn Down Barrel for Tube or Front Sight Base |
1. On existing barrel barrel
must be removed
2. On new barrel barrel off receiver |
$93.00
$55.00 |
| Install Factory Replacement Barrel |
Barrel not included |
$105.00 |
| Install After Market “Non-Chambered” Target Barrel |
Custom Machined Match Barrel |
$165.00 |
| Turn outside dimensions for your custom barrel (true to the
bore) |
Attention is given to the mating
diameter of the gas block. Tightest possible to insure no gas leakage to
prevent vertical stringing of rounds. Custom contours and overall length available |
$105.00 |
| Machine gas port |
Special vertical taper design |
$30.00 |
| Machine flutes into barrel |
includes cryogenic
treatment |
$190.00 |
| Install JP Trigger |
Install 3-4 lbs |
$35.00 |
|
Single stage trigger rework: super crisp, fully adjustable for sear contact and trigger over-travel. |
Uses factory standard AR-15 trigger
assembly |
$140.00 |
|
National Match Sight Modifications |
| Front Sight Modifications |
This modification is done by installing
a lock screw into the front sight assembly that will remove all vibrations or
movement of the front sight while
still allowing the front sight to be adjusted. |
$38.00 |
| Rear Sight Modifications |
Patent pending design has removed all rotary movements of A2 sight base and to insure perfect
elevation adjustments and to add complete
stability to base. (Labor cost only) |
$140.00 |
| Rear Sight Modifications |
with Bob Jones
Hooded Apertures: Same as above but includes the installation and Aperture
Kit installed on customer’s factory A2 sight or after market match sight |
$190.00 |
| Custom
rifles built to order. Please call for additional details. |
|
Aftermarket
and custom parts may require fitting for assembly. Please consult with a
professional gunsmith before attempting any modification |
